[vc_row][vc_column][vc_column_text]Switch to Administrator Mode that will allow you to be able to configure CATIA according to your needs , you can customize your set level, the standards used …
The first step is to check whether the default directory of your configurations is not read-only, to locate one right click on CATIA launch icon and selecting ‘’Properties’’ path shown in ‘’target’’:[/vc_column_text][vc_single_image image= »1394″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][vc_row_inner][vc_column_inner width= »2/3″][vc_column_text]Corporate directory name is often identical to the login session if this is not the case, or if you do not want to overwrite the existing configurations you can create a directory, the location of the new directory has no importance, copy the path to this directory.
In this directory there must be a file: ‘’CATIA.V5R20.B20.txt ‘’ if he is not copy it from the default directory.After creating, copy / paste from CATIA launch icon :[/vc_column_text][/vc_column_inner][vc_column_inner width= »1/3″][vc_single_image image= »1393″ border_color= »grey » img_link_large= » » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]Right-click the new launch icon, copy the line of the target box, it should look like this:[/vc_column_text][vc_single_image image= »1395″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]For now, the part that interests us is that outlined in red, is the way in non- admin start:[/vc_column_text][vc_single_image image= »1396″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]In my example: ‘’C: \ ProgramData \ DassaultSystemes \ jlecam’’
Replace that part of the directory path created earlier, for me it will:
‘’C: \ ProgramData \ DassaultSystemes \ adminjp’’
Note: you must leave the quotes
Then there must be written (red box) -run « CNEXT.exe » -env CATIA.V5R20.B20 -direnv[/vc_column_text][vc_single_image image= »1397″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]Behind « CNEXT.exe » -admin is added, which gives :[/vc_column_text][vc_single_image image= »1398″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]Is validated by ‘’ Apply’’, we start with CATIA launch icon ‘’admin’’ message should appear:[/vc_column_text][vc_single_image image= »1404″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]Edit the file ‘’ CATIA.V5R20.B20.txt’’:
Tell the variable ‘’CATReferenceSettingPath =’’the path to your directory and save it. (We will see later what the other variables are)[/vc_column_text][vc_single_image image= »1399″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]Start CATIA Admin mode, this message should appear:[/vc_column_text][vc_single_image image= »1409″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]That’s it we’re in Administrator mode CATIA is checked by going to options ’’Tools’’ ‘’Options ‘‘:[/vc_column_text][vc_single_image image= »1410″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width= »1/1″][vc_column_text]The options are unlocked; you can see the padlock ‘’icon green’’ open position.
Going back into the created directory, we can see that new files have been created; we will see later what these files…[/vc_column_text][vc_single_image image= »1435″ alignment= »center » border_color= »grey » img_link_large= »yes » img_link_target= »_self » img_size= »full »][/vc_column_inner][/vc_row_inner][vc_column_text][wpfilebase tag=file id=18 /][/vc_column_text][/vc_column][/vc_row]